Technical.data; Cleaning.instructions; What.to.do.if - Becker Centronic SensorControl SC43 Notice De Montage Et D'utilisation

System.of.protection.
Permissible.ambient.temperature.
Length.of.cable.
.
Clean.the.device.with.a.damp.cloth.only..Do.not.use.cleaning.agents.as.these.
may.attack.the.plastic.
Problem
The.roller.shutters.close.
again.about.3.minutes.
after.opening.
The.pre-set.sunlight.
and.twilight.parameters.
cannot.be.changed.or.
are.not.displayed.
Sensor.falls.off.the.
pane.
Technical Data
IP.54
0.to.+55.°C
.m.(Art.-No.:.403.000.004.0).or
5.m.(Art.-No.:.403.000.005.0)
Cleaning Instructions
What to do if...?
Cause
The.sunlight.setting.has.
been.reached.or.the.
SC43.is.covered.up.
No.SC43.is.connected.
or.the.light.sensor.or.the.
connecting.wire.is.faulty.
Insufficient.adhesion.
Solution
Check.the.twilight.control.
setting.and.the.position.of.
the.SC43.on.the.window,.
which.may.have.come.off.
the.window.pane.
Check.the.SC43,.the.
connecting.wire.and.con-
necting.terminal.
Clean.window.thoroughly.
DE
GB
FR
NL
15