Bresser National Geographic 90-67000 Mode D'emploi page 38

2. Hold [ALARM] for 3 seconds. The hour digits will blink.
3. Set the alarm time with ▲ or ▼.
4. Hold [ALARM] for 3 seconds again to set the alarm time minutes.
5. To confi rm, press [ALARM] once again.
6. You can now activate or deactivate the alarm by pressing ▲ or ▼.
When the alarm is disabled, the display will show [OFF]. When it is
activated, you will see the currently set alarm time.
7. When fi nished, press [ALARM] once more.
The activated alarm symbol will appear.
7.2 SNOOZE FEATURE
The alarm will stop if you press [SNOOZE] while the alarm is active.
After 8 minutes, the alarm will start again. The alarm sound will be active
for 2 minutes if no button is pressed. After this time, the snooze cycle will
activate again automatically. After three '2 minute alarm sound cycles' or 3
'snooze cycles' (4 times [SNOOZE] button pressed), the alarm clock will
disable itself, depending on the current mode, as described below.
7.3 HOW TO STOP AN ALARM
Press the [ALARM] button to stop an active alarm.
If the weekday alarm [
at the same time on the next weekday. If the single alarm [
the alarm will stop and will not start again until you manually set a new
alarm date.
38
w
] function is active, the alarm will start again
s
] is set,