Technical Data; Machine Features; Operation; Settings - Festool CXS Notice D'utilisation D'origine

English
4

Technical data

Cordless drill
Motor voltage
No-load speed*
1st gear
2nd gear
Max. torque
soft/hard screwdriving applica­
tion
Adjustable torque
Chuck clamping range
Max. drill diameter
Wood/metal
Tool holder in drill spindle
Weight (incl. battery pack and
chuck) as per EPTA procedure
01:2014
Weight incl. battery pack and
Centrotec
* Speed values based on fully charged battery
pack.
More technical data about the charg­
er and the supplied battery pack can
be found on page 6.
5

Machine features

[1-1] Drilling symbol
[1-2]
Torque thumbwheel
[1-3] Torque/drilling position marking
[1-4]
Gear switch
[1-5] Right/left switch
[1-6] On/Off switch
[1-7] Belt clip
[1-8] Insulated gripping surfaces (grey
shaded area)
[1-9] Button for releasing the battery pack
[1-10] Bit store
[1-11] LED lamp with capacity indicator
[3A] Wall mount for charger
The specified illustrations appear at the begin­
ning of the Operating Instructions.
16
The specified illustrations appear at the begin­
ning of the Operating Instructions.
CXS
6
10.8 V
6.1
0–430 rpm
0–1300 rpm
10/16 Nm
6.2
0.3–3.4 Nm
The LED [3-1] on the charger indicates the re­
1–10 mm
spective operating status of the charger.
12/8 mm
1/4"
1.1 kg
0.9 kg
7
Risk of injury
► Only adjust the settings when the power
tool is switched off.
7.1
– Switch to the left = clockwise rotation
– Switch to the right = counterclockwise rota­
tion

Operation

Changing the battery pack [2]
Battery pack is ready for use immedi­
ately upon delivery and can be charg­
ed at any time.
Side of the belt clip [2-1] can be re­
placed when battery pack is removed.
Charging the battery pack [3]
LED yellow - continuous
light
Charger is ready to use.
LED green - light flashes
quickly
Battery pack is charged to
maximum capacity.
LED green - light flashes
slowly
Battery pack is charged to
80% and with reduced cur­
rent.
LED green - continuous light
Battery pack is charged.
LED red - light flashes
General fault indicator, e.g.
incomplete contact, short
circuit, defective battery
pack, etc.
LED red - continuous light
Battery temperature is out­
side permissible limit values
(0 °C to 45 °C).

Settings

CAUTION
Changing direction of rotation [1-5]