Table Des Matières; Original Operating Manual 1 Symbols; Machine Features; Intended Use - Festool T 12+3 Mode D'emploi

Original operating manual
1 Symbols ..................................
2 Machine features ......................
3 Intended use ...........................
4 Technical data ..........................
5 Safety instructions ....................
6 Operation ................................
7 Settings ..................................
8 Tool holder, attachments............
9 Working with the machine..........
10 Service and maintenance...........
11 Accessories..............................
12 Disposal ..................................
13 Transport.................................
14 Warranty .................................
15 EU Declaration of Conformity......
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear ear protection.
4

Technical data

Cordless drill
Motor voltage
Idling speed*
Max. torque
Adjustable torque**
Chuck clamping range
Max. drill diameter in
Tool holder in drill spindle
Weight without battery, with Centrotec
* Speed specifications with fully charged battery pack.
13
13
13
13
2
14
[1-1]
15
[1-2]
16
[1-3]
16
[1-4]
17
[1-5]
17
[1-6]
18
[1-7]
18
[1-8]
18
[1-9]
18
[1-10]
18
[2-1]
3
Cordless drills are suitable for drilling into
metal, wood, plastics and similar materials
as well as inserting and tightening screws.
The charger TRC 3 is designed for charging
the battery packs listed.
T 12+3
10,8 - 12 V
1st gear
2nd gear
Soft material 20 Nm
(wood)
Hard material 34 Nm
(metal)
1./2. gear
wood 25 mm
metal 14 mm
0,95 kg
T 12+3, T 15+3, T 18+3
Wear protective gloves.
Do not throw in the household waste.

Machine features

Buttons for releasing the battery pack
Bit store
On/Off switch
Right/left switch
Gear switch
Drilling symbol
Screwdriving symbol
Drilling/Fastening selector switch
Belt clip
Torque thumbwheel
Battery blanking plug

Intended use

The user shall be liable for damage and
accidents resulting from non-specified
use; this also includes damage and
wear caused during industrial continu-
ous operation.
T 15+3
14,4 - 15,6 V
0 - 450 rpm
0 - 1500 rpm
27 Nm
40 Nm
0,5 - 8 Nm
1,5 - 13 mm
35 mm
16 mm
1/4 ''
1,02 kg
GB
T 18+3
18 V
30 Nm
45 Nm
45 mm
16 mm
1,05 kg
13