Emptying The Water Reservoir; Cleaning And Maintenance; Self-Cleaning - Domo DO7054S Mode D'emploi

Comment: the indicator will turn on and off while ironing. This is to maintain a constant
temperature. This is normal.
SPRAYING
· Pushing the spray button will cause water to be sprayed out of the opening and moisten
materials difficult to iron.
· To prevent staining, it is recommended not to use the spray function on delicate materials
such as silk.
· This function can be used with every temperature and will not interfere with the other
functions.
· With the first use of the spray button, it will need to be pressed several times to activate it.
· Make sure there is always enough water in the reservoir.
STEAM BOOST
· You can remove stubborn wrinkles with a steam boost.
· The steam shot works best with the temperature regulator set at MAX.
· Press on the steam boost button. Wait a few second for the steam to penetrate the fabric
before you press again.
· The steam shot can also be used when the iron is upright. This allows you to remove
wrinkles from garments or curtain that are hanging up.
· Note: Do not use the steam boost button more than three times in a row in order to
maintain optimal steam quality. Using the steam boost several times in a row will cool the
iron. For this reason, pay attention to the temperature indicator light before and after you
use this function.

EMPTYING THE WATER RESERVOIR

· Pull the plug from the outlet.
· Set the steam regulator to ironing without steam
· Open the water reservoir and remove the water. Shake the iron to remove the excess
water.

CLEANING AND MAINTENANCE

SELF-CLEANING

This function removes the lime scale and minerals that build up in the steam chamber.
This treatment is best done once a month to keep the iron in optimal working condition.
Depending on the hardness of the water, this treatment may have to be done more than once
a month.
32
DO7054S
.