Domo DO7054S Mode D'emploi page 33

1. Fill the iron as described in "Filling the water reservoir". Fill the water tank halfway.
Caution: Never fill the iron with vinegar or other liquid decalcifiers.
2. Place the iron straight up on a flat surface.
3. Put the plug in the mains.
4. Put the device on at the max. temperature. Wait until the device is at temperature.
5. Hold the iron horizontally above the sink.
6. Move the steam regulator to the self-cleaning position: 'CALC CLEAN'. Keep it pressed in.
Steam and boiling water will come out of the holes in the sole of the iron, rinsing the lime
scale and minerals out.
7. Move the iron gently back and forth, until the water tank is empty.
8. Release the steam regulator button when you are finished cleaning.
9. Place the iron in a vertical position and allow it to cool completely
10. Dry the sole with a cold, damp cloth.
Note: Make sure you do not come into contact with the hot water.
CLEANING THE IRON
· Remove the plug from the outlet and allow the appliance to cool completely before
cleaning it.
· Clean the sole of the iron with a damp, clean cloth. Do not use any sharp object or
aggressive cleaning products.
STORAGE
· Allow the iron to cool completely.
· Remove the water from the water reservoir as indicated under "Emptying the water
reservoir".
· Store the iron in an upright position.
www.domo-elektro.be
33
DO7054S