Control Panel; Before The First Use - Domo DO7109S Mode D'emploi

· Any injury or damage caused by failure to comply with these rules are at your own risk. Neither the
manufacturer, importer, or the supplier may be held liable.
PARTS
1. Filling opening
2. Water tank
3. Temperature indication light
4. Steam release button
5. Temperature dial
6. Soleplate
7. Anti-scale cartridge compartment lid
8. Anti-scale cartridge
9. Thermal insulation pads

10. Control Panel

11. Cord storage
CONTROL PANEL
12. Eco button with indication light (green)
13. On/off button with indication light (blue)
14. Self-cleaning button with indication light
(red)

BEFORE THE FIRST USE

· Remove any stickers or protective foil from the soleplate.
· Heat up the iron until the maximum temperature and iron on a damp cloth during a couple of minutes
to remove any possible residues from the soleplate.
CAUTION:
· During the first use it is normal that a specific odeur escapes from the appliance. This odeur will
disappear after a while.
· Some particles may come out of the soleplate during the first use. This is normal. The particles are
harmless and will disappear after a while.
· When turning on the appliance, the steam generator may produce a pumping sound. This is normal.
This sound indicates that water is pumped into the steam generator.
· While the soleplate is heating up, some steam will be released automatically. This is also normal and
will last for about 3 seconds.
24
DO7109S
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
6
1
2
11
8
3
4 5
10
12 13 14
7
9