User manual - English
IMPORTANT: Since almost all cleaners contain acid, all parts that have been treated with
cleaner must be rinsed thoroughly to avoid corrosion by the acid.
9. Remount the housing front panel.
10. Plug the power supply in the power socket and restart the machine at the production counter.
For health reasons, it is advisable to remove the first ice from the storage container after
cleaning and not to consume it.
7.3 Combi module resp. Crush- Module W120-W240
To clean the machine, you must observe the following steps to pull out the crusher module:
1. Switch off the machine at the production switch (aus/ off).
2. Unscrew the cover of the front panel of the Combi module, loosen four screws.
Seite 58
User-manual-CombiLine-W80-W120-W240-0299-2