7-1
7-2
7
8
8-1
8-4
8-2
8-3
Sanding close to edges
The detachable brush segment allows you to re-
duce the distance between the wall/ceiling and
the side of the sanding pad.
Press and hold the knob [7-1].
Remove the brush segment [7-2].
There is a retainer in the lid of the SYSTAINER
for storing the brush segment.
Hook in the brush segment at the opposite end
to the knob [7-1], swivel towards the sanding
head and engage into position.
Dust extraction
CAUTION
Breathing in dust can damage the respiratory
passage!
Always connect the machine to a dust extrac-
tor.
When performing work that generates dust,
always wear a dust mask.
A Festool dust extractor with an extractor hose
diameter of 27 mm or 36 mm (recommended due
to the improved suction power) can be connected
to the extractor connector [8-2].
The special extraction hose and special suction
sleeve [8-1] (available as an accessory) ensure
permanent attachment and protect against
kinking.
Use the dust extractor CT 36 E AC-LHS on large
surfaces because this extractor guarantees the
permanent suction power required.
Press the green button [8-4] to open the me-
chanical lock [8-3].
Attach the extraction hose on the dust extractor
to the outlet spigot [8-2].
Swivel the mechanical lock [8-3] upwards until
it engages.
Operation
WARNING
Risk of injury
Do not hold the machine by the head.
Hold the machine with both hands.
Make sure that all clamping levers are closed
before operating the machine.
13