Esc System Manual - RocHobby 1941 MB Scaler Manuel D'utilisation

4CH 2.4GHz
W A T E R P R O O F R E C E I V E R
Operation
A. THROTTLE TRIGGER
Neutral
Forward/
Speed increase
Fail safe function setting
Turn on the TX, keep the throttle at the fail safe point, press the SW button on the receiver for about 2 seconds. The LED
should flash for 5 seconds, release the SW button and TH trigger, then turn off the TX.
General care
1. Always use clean, dry cloth or soft bristle brush to clean your equipment.
2. Never use chemical cleansers, as these could damage the sensitive electronics and plastics.

ESC SYSTEM MANUAL

Features
1. Waterproof and dust-proof for all weather operations.
2. Compact sizing with built in capacitor module.
3. Automatic throttle range calibration.
4. Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss
protection.
5. Easily programmed with the jumpers.
LED>
SW>
Brake/Speed
decrease Reverse
B. STEERING WHEEL
Neutral
Left
08
LED
LED>
4CH 2.4GHz
W A T E R P R O O F R E C E I V E R
SW>
1. Push the trigger
forward to slow down
or brake.
2. Pull the trigger backward
to accelerate.
Right
EN