Setting Up The Canvas Bracket; Operating The Vehicle - RocHobby 1941 MB Scaler Manuel D'utilisation

SETTING UP THE CANVAS BRACKET

Step1: Pull out the canvas bracket.
Step2: Insert the canvas bracket into the bracket mount.

OPERATING THE VEHICLE

Step 1: Turn on the transmitter- the status LED will turn blue and an audible tone will be emitted.
Step 2: Power on the vehicle by turning on the ESC switch. The front lights will illuminate and an audible sound will be emitted.
After the receiver confirms that a transmitter signal has been received, it will emit another audible tone.
The above guidelines, must be installed the battery.
This vehicle is equipped with a slipper. If the vehicle loses transmission traction, please check the slipper tension and replace
if necessary.
Spare parts C1067 SLIPPER PAD.
14
EN