Replacement Parts; Troubleshooting; Technical Specifications; Fcc Compliance Statement - Beurer FC 65 Mode D'emploi

9. Replacement parts

Brush type
Intended purpose
Skin type
Replace
Item number and/or order number 604.91

10. Troubleshooting

Problem
The device does not charge.
The device will not switch on.
The device does not cleanse
as well as it did to begin with.

11. Technical specifications

Power Supply
Dimensions
Weight
Battery Capacity
Battery Voltage
Battery Type
Subject to errors and changes.

12. FCC Compliance Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Brush head
Daily cleansing
All skin types
After 4 months
Ensure that the charger is connected to a functioning socket and that
the device is correctly positioned on the charger. If the device still fails to
charge, contact Customer Service.
When switching the device on, ensure that you press the ON/OFF/speed
button with sufficient force and hold the button for a sufficient amount of
time. Charge the device as described in these instructions for use. If it is
still not possible to switch the device on, contact Customer Service.
The brush is worn. Replace the brush head. Replacement heads can be
ordered from Customer Service.
100-240 VAC, 50/60 Hz, 0.5A
6.3 x 2.2 x 3 in (16 x 5.6 x 7.5 cm)
approx. 5 oz (140 g)
600 mAh
2.4V
NiMH
6
Solution