Operation: Control Panel - Maintenance - Quick SBC ADVANCED Série Manuel De L'utilisateur

OPERATING - MAINTENANCE
GB
CONTROL PANEL
The control panel is made-up of three LEDS:
POWER LED, FLOAT LED and CHARGE LED (BULK, ABSORPTION, see fig.4)
The information supplied by the LEDS are listed below:
POWER LED
Description
LED Color
No mains power or overheating.
Off
In case of overheating check if the installation of the battery charger is correct.
Switch off and allow the equipment to cool down for at least 10 minutes.
Green
Power ON
FLOAT LED
LED Color LED Status
Off Off
Green Fixed
Flashing
Green
CHARGE LED
(BULK, ABSORPTION)
LED Color LED Status
Off Off
Yellow Fixed
Flashing
Yellow
MAINTENANCE
The battery charger does not need any maintenance. To ensure optimum performance from the
equipment, once a year check the cables and the electrical connections.
18
Description
No indication
FLOAT phase - FLOAT charge
Short circuit or overload in output.
Check output cables, the group of batteries and the points of use connected to the battery charger.
Description
No indication
ABSORPTION phase or BULK phase
Short circuit or overload in output.
Check output cables, the group of batteries and the points of use connected to the battery charger.