afx light SPOTY60LED Manuel D'utilisation page 6

9CH Color scroll
10CH 9 Gobos + Open
11CH Gobo shake
12CH Reset
Cleaning
Due to fog residue, smoke, and dust cleaning the internal and external lenses should be carried out periodically to
optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-side casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Trouble Shooting
Problem
Fixture can not start to work
Fixture light normally, but no responding to
the DMX controller
Fixture work intermittently
Dark light, brightness decreases obviously
Beam is not pure (have a halo）
The beam is distorted
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask
your local authorities or your dealer about the way to proceed.
©Copyright LOTRONIC 2017
000-255 0-100% in steps of 1/256
0-9 Open
10-19 Gobo 1
20-39 Gobo 2
40-59 Gobo 3
60-79 Gobo 4
80-99 Gobo 5
100-119 Gobo 6
120-139 Gobo7
140-159 Gobo8
160-179 Gobo9
180-217 Gobo rotating CW from slow to fast
218-255 Gobo rotating CCW from slow to fast
0-255 Gobo shake from slow to fast
No function
1-199
Reset after 3 second
200-239
No function
240-255
1. Check if the power fuse burnout
1. Check if the DMX start address is correct 2. Check if the XLR signal
cable was damaged
Check if the fan works well, whether dust blocks the fan and fan nets
1. Check whether the internal and external optical system clean
Clean the dust and oil of bulb, lens and other parts
1. Check whether the lens is broken
2. Clean the dust or oil of lens
SPOTY60LED
Solution
Page 6