Controlling A Sound Module With The Data Entry Slider; Altering The Timbre (Channel Aftertouch) - Roland ED PC-300 Mode D'emploi

9. Controlling a sound module with the DATA
ENTRY slider
The following functions can be assigned to the DATA ENTRY slider:
Function name
Channel Aftertouch
Velocity
Reverb Level (CC 91)
Chorus Level (CC 93)
Panpot (CC 10)
Volume (CC 07)
CC Select
Note: In some cases, moving the slider only
slightly may not produce any noticeable
change. If this happens, move the slider up
and down once, then set the value.
Altering the timbre (Channel
Aftertouch)
The PC-300's keyboard does not transmit
Channel Aftertouch messages. You can,
however, achieve a similar result by assign-
ing Channel Aftertouch to the DATA
ENTRY slider and moving it up and down
Description
Alters the notes currently being played (volume, pitch, filter)
Changes the dynamics (timbre, volume)
Sets the depth of the Reverb effect
Sets the depth of the Chorus effect
Sets the sound position (localization in the stereo sound field)
Sets the volume level of the Part
Depends on the selected controller number
to obtain the desired effect.
Channel Aftertouch is a function that lets
you alter notes (that have already been
played) by applying additional pressure on
the keys.
1. Set the MIDI transmit channel to
match that of the Part or module you
wish to control.
See "Setting the MIDI transmit channel"
on page 11.
2. Press MIDI/SELECT [3] (the LED will
light).
Owner's Manual
15