Connecting The »Cm-Bt2« To A Compatible Computer; Neckloop Safety Closure - HumanTechnik CM-BT2 Mode D'emploi

Connecting the »CM-BT2« to a compatible computer
1. Switch your computer on and ensure that the Bluetooth
hardware on the computer is activated. Switch on the »CM-BT2«.
2. Press the function key 4 on the »CM-BT2« for approx. 6 seconds
until the blue and red status indicator flashes alternately. The »CM-
BT2« remains in pairing mode for 2 minutes.
3. Run the Bluetooth software on the computer. Follow the software
instructions to connect the »CM-BT2«.
4. Select the »CM-BT2« from the list of devices that are found. If
necessary, enter the password „0000" to pair the »CM-BT2« and the
computer and establish a connection.
5. If the pairing is successful, the blue status indicator on the »CM-BT2«
flashes four times quickly and the teleloop and headphones emit an au-
dible signal.
We regret that we are not able to provide telephone support for any prob-
lems you may encounter when operating this device with your PC

Neckloop Safety Closure

Please make sure that the safety closure of the neckloop is completely
closed, to ensure that it functions properly.
26 English