Reconnecting The »Cm-Bt2« With The Telephone; Basic Operation; Making And Answering Calls; Using The »Cm-Bt2« As Music Headphones With The Telephone - HumanTechnik CM-BT2 Mode D'emploi

Reconnecting the »CM-BT2« to the telephone
The blue status indicator flashes for 1 second every 3 seconds as soon as
the »CM-BT2« becomes disconnected from the telephone, for example, if
the distance between them is too great.
Once the »CM-BT2« and the telephone are within range of one another
again, the »CM-BT2« reconnects automatically.
The blue status indicator flashes for 1 second every 5 seconds and the
teleloop/headphones emit an audible signal when the connection is re-
established.

Basic operation

Making and answering calls

To make a call, ensure that the telephone is connected to the »CM-BT2«
and make the call as normal.
To make a call, press the function key 4 briefly.
To end a call, use the buttons on the telephone or press the function key
on the »CM-BT2«.
Using the »CM-BT2« as music headphones with the telephone
If there is a music player integrated in your telephone, you can also use
the »CM-BT2« to listen to music. As soon as an incoming call is detected,
the music will be interrupted, the »CM-BT2« will ring and you can press the
function key 4 to answer the call. The music will continue to play once you
have ended the call.
24 English