Charging The »Cm-Bt2; Charging The »Cm-Bt2« With The Power Supply - HumanTechnik CM-BT2 Mode D'emploi

Charging the »CM-BT2«
The »CM-BT2« has an integral, rechargeable lithium polymer battery. Prior
to initial use, it is recommended that the »CM-BT2« is fully charged.
Please note that the »CM-BT2« cannot be used whilst it is
being charged
Charging the »CM-BT2« with the power supply
Connect the enclosed USB charging cable to the »CM-BT2« using the
charger connection 7. Connect the other end of the USB charging cable
to the enclosed power supply. Insert the power supply into a 230 V plug
socket.
The »CM-BT2« is fully charged when the status indicator has gone out.
Charging the »CM-BT2« with the power supply
Connect the enclosed USB charging cable to the »CM-BT2« using the
charger connection 7. Connect the other end of the USB charging cable
to the enclosed power supply. Insert the power supply into a 230 V plug
socket.
The »CM-BT2« is fully charged when the status indicator has gone out.
20 English