Appendix; Safety Notes; Maintenance And Care - HumanTechnik CM-BT2 Mode D'emploi

Masquer les pouces Voir aussi pour CM-BT2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30

Appendix

Safety notes

The »CM-BT2« has been built using state-of-the-art technology and in ac-
cordance with recognized saftey standards.
Please note the following safety instructions:
• Never expose the device to the following:
- Sources of heat
- Direct sunlight
- Moisture / dampness
• Protect the device against contact with water, dust, harsh fluids and
steam.
• Only plug the connection cord into the corresponding jack.
• Connect only approved accessories.
• No changes to the communications system, neither technical nor non
technical, are permitted.
• The »CM-BT2« communications system contains small parts that
could be easily swallowed. Keep out of the reach of children under 3
years of age.
The manufacturer cannot be held liable for any damages or personal injury
whatsoever caused by the inappropriate use or misuse of the device.

Maintenance and care

The »CM-BT2« headset does not require any maintenance. If the unit does
become dirty, simply wipe it clean with a soft, damp cloth. Never use spi-
rits, thinners or other organic solvents.
Do not set up the »CM-BT2« where it will be exposed to full sunlight for
long periods.
In addition, it must be protected against excessive heat, moisture and se-
vere mechanical shocks.
Note: This product is not protected against splash water. Do not place any
containers filled with water, such as flower vases, or anything with an open
flame, such as a lit candle, on or near the product.
English 27

Publicité

Table des Matières
loading

Table des Matières