Optional Accessories - Metz MECABLITZ 45 CL-1 NiMH Mode D'emploi

12. Optional Accessories

Malfunctions and damage caused to the mecablitz due to the use of
accessories from other manufacturers are not covered by our guarantee!
• Battery holder 45-39
For alkaline manganese batteries.
• Battery charger set B 45 (Order No: 0012045)
NiCad battery and charger for subsequent conversion of the 45 CL-1
Battery model to NiCad battery operation.
• Bounce diffuser 60-33 (Order No: 0006033)
To soften heavy shadows with reflected light.
• Bracket adapter 60-28 (Order No: 0006028)
For parallax correction of reflector and camera with close-ups and wide-
angle shots.
• Camera bracket 70-35 (Order No: 0007035)
To attach the flashgun to the side of the camera.
• Camera cable release 45-26 (Order No: 0004526)
The camera shutter can be tripped with the same hand that is holding the
flashgun. This frees the other hand for focusing.
• Filter set 45-32 (Order No: 0004532)
Consists of a set of 4 colour effects filters and 1 clear filter to hold any
coloured foil.
• Light reducing filter set 45-28 (Order No: 0004528
Consists of three neutral density filters, and a transparent filter holder for
coloured foils.
• Mecalux 11 (Order No: 0000011)
Slave triggering unit. For optical, delay-free remote triggering of slave
flashguns by a camera-triggered flash. Responds also to infrared light
beam. Does not require batteries.
• Mecalux Holder 60-26 (Order No: 0006026)
To mount the Mecalux 11.
• NiCad battery pack 45-40 (Order No: 0004540)
• Power Pack P 76 (Order No: 000129768)
For a high number of flashes and short recycling times (approx. 400 full-
power flashes)
• Shoulder strap 50-31 (Order No: 0005031)
• Synch leads:
Coiled synch lead 45-49 (Order No: 0004549)
Coiled synch lead 45-54 for hot shoe (Order No: 0004554)
Synch lead 45-48, 1 m (Order No: 0004548)
Synch extension lead 60-54 (5 m) (Order No: 0006054)
41