Energy Levels - Silk-n Infinity H3101 Mode D'emploi

Control
Ready/skin tone warning
indicator light (green) (#7)
Bluetooth indicator light
(blue) (#4)
4.2 Skin colour sensor
Light-based hair removal on darker skin tones may result in adverse effects
such as burns, blisters, and skin colour changes (hyper- or hypo-pigmentation).
Silk'n Infinity has a skin colour sensor that detects the colour of your skin
automatically. The skin colour sensor checks your skin colour at the start of, and
occasionally during, each treatment.
If you see no light pulse and the ready/skin tone warning indicator light
a
blinks rapidly, this is an indication that your skin tone, measured by the skin
colour sensor, is too dark for safe application. Try using the device on a
different part of your body.

4.3 Energy levels

The energy level determines the intensity of the light pulse delivered to your
skin. As the energy level increases, so do hair removal results, as well as the risk of
possible side effects and complications.
The device has 5 levels of energy from 1 (the lowest) to 5 (the highest),
U
represented by 5 energy level indicator lights.
When the device is turned on, the energy level is set to level 1 automatically.
U
Only one energy level indicator light will be on.
To change the energy level, press the control button repeatedly to
U
increase the energy level from 1 to 5. Once at level 5, press the control
button again to reduce the energy level from 5 back to 1.
Action
Constant
Blinks rapidly
Blinks
11
Function / Mode
Device is ready for use.
Skin tone is too dark for safe use. No
light pulses are emitted.
Bluetooth is active.
EN