Transport / Storage; Decommissioning / Disposal; Decommissioning; Disposal - Honsel BZ 103 A Manuel D'utilisation

If no stroke is performed, the trigger
holder is too far from the contact
force control adapter. The distance
can be adjusted at the adjusting
screw on the trigger holder.

6 Transport / storage

Transport instructions:
• Keep the machine in the original packaging
during transport.
• Before changing the working location, check
that the working temperature range specified in
the technical data, can still be maintained, see
Chapter 2.9.
Storage instructions:
• Keep the machine in the original packaging
during storage.
• Do not store the machine outdoors.

7 Decommissioning / disposal

7 .1 DECOMMISSIONING

Precondition:
• The machine is not to be used for several
months.
1. Disconnect the media supply lines.
2. Store the machine in the original packaging.
3. Before using the machine again, perform all
the maintenance operations described in the
maintenance schedule, see Chapter 5.1.

7 .2 DISPOSAL

The disposal instructions for the process media
can be found in the safety data sheets.
ATTENTION
Improper disposal of environ-
mentally hazardous substances
Environmental damage
• Observe the disposal instruc-
tions on the safety data sheets
of the process media used.
• Observe all national and
regional laws and regulations
concerning waste disposal.
50 | English

8 EC declaration of conformity

Manufacturer:
HONSEL Distribution GmbH & Co.
Friedrich-Wöhler-Str. 44
24536 Neumünster, Germany
(Legal) entity authorised to compile the technical
documentation:
HONSEL Distribution GmbH & Co.
Friedrich-Wöhler-Str. 44
24536 Neumünster, Germany
Products:
Pneumatic-hydraulic
setting tool
BZ 103 A
BZ 123 A
BZ 133 A
BZ 143 A
The manufacturer hereby declares that the named
products satisfy the requirements of the following
regulations:
• EC Machinery Directive 2006/42/EC
Most important applied harmonised standards:
• EN ISO 12100:2010
• DIN EN ISO 11148-1:2012
If the machine is modified without our knowledge
and consent, this EC Declaration of Conformity will
be voided.
Neumünster, 01/01/2021
_____________________________________
Alexander Siefert (Managing Director)
From serial number
0515-05012
1415-00919
2215-00066
4416-00001