Operation; Stopping The Machine In An Emergency - Honsel BZ 103 A Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 76

4 Operation

WARNING
Improper use
Death, serious injuries or material
damage
Read and observe the
information in the operating
manual before operating the
machine.
Store the operating manual in
the vicinity of the machine.
Never use the machine in a
damaged condition.
Use the machine only for its
intended purpose.
Perform the work steps as
described in this manual.
Never perform work on or
with the machine without a
workpiece.
Do not make unauthorised
modifications to the machine.
WARNING
Parts flying out of the machine
Serious injuries or material damage
Do not point the machine
towards persons.
Stand behind the stud collector
or stud securing cap during
operation of the machine.
Empty the stud collector at
regular intervals.
Disconnect the machine from
the energy and media supply
systems before changing tools
or accessories.
Wear impact-resistant protec-
tive goggles when operating the
machine.
Clamp the workpiece securely
before starting work.
Always test the stud holder
before starting work.
42 | English
WARNING
Lack of protective equipment
Serious injuries or even death
Use only undamaged protective
equipment.
Wear ear protectors during all
operating work steps.
Wear protective goggles
during all work steps for
commissioning, operation,
cleaning, maintenance or during
replacement of components.
Wear protective gloves
during all work steps for
commissioning, operation,
cleaning, maintenance or during
replacement of components.
WARNING
Pressurised oil
Serious injuries or material damage
Use only clean equipment and
clean oil without air bubbles for
filling.
Secure hoses and lines to
prevent them from uncontrolled
whipping.
Do not exceed the maximum
working pressure indicated
in the technical data; use a
pressure reducer, if necessary.
Do not use the hoses or lines to
carry the machine.
Operate the machine only in
a well-ventilated area without
hazardous vapours.
Use the hydraulic oil specified
in the technical data.
Operate the machine only with
the oil drain plug screwed in.
4 .1 STOPPING THE MACHINE IN AN
EMERGENCY
Precondition:
There is an emergency.
1. Disconnect the setting tool from the
compressed air supply.
2. Immediately bar the machine and prevent its
further use.

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bz 133 aBz 123 aBz 143 a

Table des Matières