During Use - Princess 282990 Mode D'emploi

• If you use an extension lead make
sure that it is earthed, has earthed
plugs, and is connected to an earthed
wall socket. Always use an extension
lead with a diameter suitable for the
appliance's maximum current
(Ampere) and power rating (Watt).
• Always unwind the extension lead
completely.
• Always remove the plug from the wall
socket or the 12 V DC plug from the
lighter socket when you are no longer
using the appliance.
• When you remove the plug from the
wall socket or the 12 V DC plug from
the lighter socket, pull on the plug and
not on the cable.
• Never pull the connecting cable to
move the appliance.
• Check regularly whether the appliance
cable is still intact. Do not use the
appliance if a cable shows signs of
damage. Have a damaged cable
replaced by a qualified service
technician.
• Ensure that the appliance, the cable
and the plug do not come into contact
with heat sources, such as a cooking
plate or an open fire.
• Ensure that the appliance, the cable
and the plug do not come into contact
with water.
• The appliance must be able to
dissipate its heat to avoid a risk of fire.
Therefore ensure that there is
sufficient clearance around the
appliance and that it cannot come into
contact with flammable materials. The
appliance may not be covered.

During use

• For optimum performance please use
the appliance at ambient temperatures
between 10°C and 30°C. When used in
higher ambient temperatures, the
internal cooling temperatures may
also rise. Keep the appliance in a cool
or shaded area.
• Place the appliance on a firm and level
surface, at a location where it cannot
fall.
• Do not allow the cable to hang over
the edge of a kitchen surface, a work
surface or a table.
• Ensure that the cable is fully
unwound.
• Ensure that your hands are dry before
you touch the appliance, the cable or
the plug.
• Never use the appliance in damp
areas.
• Remove the plug from the wall socket
or the 12 V DC plug from the lighter
socket if there is a malfunction during
use, if you are going to clean the
appliance, fit or remove an accessory,
or are finished using it.
• Never immerse the appliance, the
cable or the plug in water or any other
fluid.
• Do not touch the appliance if it has
fallen into water. Immediately remove
the plug from the wall socket or the
12 V DC plug from the lighter socket.
Do not use the appliance any more.
• Clean the appliance thoroughly after
use (see the section 'Cleaning and
maintenance').
• Store an opened keg at the right
temperature by leaving it in the
appliance. Ensure that the appliance
always has a power supply. If you are
not going to use the appliance for an
extended period of time, remove the
opened keg from the appliance and
place it in the refrigerator. After
opening, the keg stays fresh for 30
days.
• Always check that the use-by date on
the keg has not expired before placing
the keg in the appliance.
Beer Tap & Cooler Article 282990 9