Installing And Adjustment Instructions - Alcad PDK-41500 Mode D'emploi

INSTALLING AND ADJUSTMENT INSTRUCTIONS

Once the flush-mounted box has been
put in place, remove the reinforcement.
Place the rings of the panel over the
extracted fixing pins. The unused pins
should be placed in their slots.
Configure the entrance panel. See
"Entrance panel configuration
instructions", page 23.
Adjust the volume level on the entrance
panel and on the monitors/telephones
(1). If there is acoustic feedback, adjust
the feedback control (
also possible to regulate the volume of
the beep (3).
DIGITAL VIDEO DOOR ENTRY SYSTEMS
) (2). It is
Remove the protecting plugs and the
fixing pins from the flush-mounted box.
Choose the two fixing pins you want to
hinge the panel on to, so that it opens
either to the right or to the left or
downwards.
Make the electrical connections. See
diagrams and "Connection instructions",
page 17.
Programme the monitors/telephones
from the main entrance panel (Look up
in the technical datasheet that comes
with the connection bracket/telephone).