Operation Of The Digital System With Keypad - Alcad PDK-41500 Mode D'emploi

DIGITAL VIDEO DOOR ENTRY SYSTEMS

OPERATION OF THE DIGITAL SYSTEM WITH KEYPAD

MAKING A CALL TO A FLAT
To make a call to a flat, key in its code on the keypad of the entrance panel. The number of digits which must be keyed in will
depend on the value which has been configured in the entrance panel (Position 8 from the configuration menu, pages 26, 27 and
28). As the code is keyed in, it will appear in the display of the panel. Press the key.
Note: If an error occurs while entering the code, press the key and enter the code again.
Call made to flat with code 12 Flat with code 12
ACTIVATING THE ELECTRIC LOCK FROM THE ENTRANCE PANEL
Press the key . Then enter one of the door-opening codes previously configured (Positions 14, 15, 16 and 17 from the
configuration menu).
Note: If an error is made while entering the door-opening code, press the key and enter the code again.
If the code is correct, the electric lock will be activated for the period of time which has been configured; at the same time, the
green LED on the entrance panel will light up. If the code is not correct, the panel will emit an error tone while the red LED on
the panel will light up .
Door-opening code
Code not correct