Installing And Adjustment Instructions - Alcad GRF-411 Mode D'emploi

P O R T E R O
INSTRUCCIONES DE INSTALACION Y AJUSTE

INSTALLING AND ADJUSTMENT INSTRUCTIONS

INSTRUCTION D’INSTALLATION ET RÉGLAGE
Nota:
Note: A tool enabling you to turn the screws of the entrance panel is included.
Note:
1
Screw the panel to the flush-mounted
box as shown in the illustration. Use
the tool provided. Do not remove the
protective backing.
4
Programme the telephones from the
main entrance panel (Look up in the
technical datasheet that comes with the
telephone).
D I G I TA L - D I G I TA L
2
Make the electrical connections. See
diagrams and connection instructions.
5
Adjust the volume level on the entrance
panel and on the telephones (1). If there
is acoustic feedback, adjust the
feedback control (
possible to regulate the volume of the
beep (3).
D O O R E N T RY S Y S T E M S
) (2). It is also
- P O R T I E R N U M É R I Q U E
3
6
Close the panel, press it against the
flush-mounted box and fix it to this
using the clamping screws. Use the tool
provided