Table des Matières
Publicité
VIDEOPORTERO DIGITAL - DIGITAL VIDEO DOOR ENTRY SYSTEMS - VIDEOPORTIER NUMÉRIQUE
INSTRUCCIONES DE INSTALACIÓN Y AJUSTE
INSTALLING AND ADJUSTMENT INSTRUCTIONS
INSTRUCTION D’INSTALLATION ET RÉGLAGE
1
If you wish to fix the entrance panel to a
wall, it is necessary to have previously
installed a means of attachment (i.e. a
flush-mounted box or surface wall-mounted
box). See the appropriate data sheets.
3
Remove the protecting plugs and the
fixing pins from the flush-mounted box.
Choose the two fixing pins you want to
hinge the panel on to, so that it opens
either to the right or to the left or
downwards.
5
Make the electrical connections. See
diagrams and "Connection instructions",
page 18.
2
Once the flush-mounted box has been
put in place, remove the reinforcement.
4
Place the rings of the panel over the
extracted fixing pins. The unused pins
should be placed in their slots.
6
Configure the entrance panel. See
"Entrance panel configuration
instructions", page 24.
1
2
3
4
5
6
8
7
9
C
0
Publicité
Table des Matières
