Alcad PDK-41500 Mode D'emploi page 24

STEP-BY-STEP CONFIGURATION
Simultaneously press the keys
Enter the MASTER code.
If this is the first time that you have accessed the configuration menu, enter the code 12345 (Default MASTER code). If it is
not the first time, enter the MASTER code which you have previously configured. The panel will emit a beep. The display will
show the text ALCAd before going to position 1 of the menu.
If the code is incorrect, the panel will emit a beep indicating that an error has been made and the red LED will flash. Begin
again at step 1.
Note: The maximum time allowed between step 1 and step 2 is 30 seconds. Once this period has elaspsed, you must begin again
at step 1.
Adapt the values of the different positions to the type of installation. See "Configuration of the Entrance Panel according the
installation", page 25.
To change the setting, press the
value with the
setting.
Note: If 30 seconds elapse without any key being pressed, you will automatically exit from the configuration menu.
- STEP-BY-STEP CONFIGURATION -
Maximum time limit
DIGITAL VIDEO DOOR ENTRY SYSTEMS
.
key. The information shown in the display will begin to blink (3.1). Select the desired
keys. In positions 14, 15, 16, 17 and 19, key in the desired code. Press the
MASTER code
Incorrect code
How to adapt the value of the positions
Positions 14,15,16,17, 19
key to confirm the