VOLTCRAFT CO-100 Notice D'emploi page 28

First power down the mains socket to which the mains adapter is connected
(e.g. switch off the respective fuse or turn out the fuse).
Then unplug the mains adapter from the mains socket. Dispose of the
damaged mains adapter in an environmentally compatible way. Do not use it
anymore.
Replace it with a new mains adapter of the same specifications.
• The mains adapter is constructed pursuant to protection category II. The only
permissible voltage source is a proper mains socket (see section „Technical
Data").
• CO
2
death! Observe your own protection for all measurements!
• On industrial sites, the accident prevention regulations of the association of
the industrial workers' societies for electrical equipment and utilities must be
followed.
• In schools, training centres, computer and self-help workshops, handling of
meters must be supervised by trained personnel in a responsible manner.
• The product must not be used in potentially explosive areas.
• Do not leave packaging material unattended. It may become a dangerous
toy for children.
• Handle the product with care. It can be damaged by impact, blows or when
dropped even from a low height.
If you are not sure about the correct operation or if questions arise which are not covered
by the operating instructions, please do not hesitate to contact us or another specialist.
Voltcraft®, Lindenweg 15, D-92242 Hirschau, Phone +49 180/586 582 7.
28
is an colour- and odour-less gas. Too high a concentration may lead to