Clearing Jams - Swingline SC170 Manuel D'utilisation

Shredder Control Panel
Auto
Off On
When illuminated, this means the machine is locked.
This means you should be careful because long hair can become
entangled in the cutting head. This could hurt you.
This means don't reach into the feed opening of the cutting head.
This could hurt you.
This means be careful of ties and other loose clothing which could
become entangled in the cutting head. This could hurt you.
This means you should be careful of loose jewellery which could
become entangled in the cutting head. This could hurt you.
This means keep children away from shredder.
This means do not use aerosol sprays anywhere near the unit.
Installation
SC170: Position the shredder onto the basket. Once the unit is correctly
positioned on the basket, plug it into a standard AC outlet (fig. A).
NOTE: The cross-cut models include safety interlocks. If the bin is not fully pushed into the
cabinet, the interlocks will not be activated and the unit will not operate.
Auto
Simply insert paper into the centre of the throat. Once your document has
activated the trigger switch, the unit will turn on automatically.
Forward and Reverse
Moving the switch to either of these positions will cause the unit to run in
the corresponding direction.
Shred Credit Cards
You can shred max. 10-15 credit cards per day. Feed the credit card into
the centre of the shredder throat, narrow edge first (G). Do not feed wide
edge first (H).
Register this product online at www.swingline.com

Clearing Jams

If a paper jam occurs, switch the unit to the reverse position until the paper
Forward is out of the throat. If a jam occurs with paper more than halfway through
the cutters momentarily switch into the REVERSE position until about 1/2" to
1" of shredded paper reverses out. Tear off two or three sheets and switch
Reverse
into the FORWARD position to clear the paper jam. In some cases, it may be
necessary to alternate between FORWARD and REVERSE positions several
times to help clear excess paper from the cutting area.
Thermal Cut-off Feature
This shredder is not intended for continuous operation. This unit features a
thermal cut-off device that automatically shuts off the shredder if run for an
extended period of time. If this occurs, simply allow the shredder to cool.
Empty Waste Bin
SC170: Lift handle into upright position and empty basket (fig. A).
This shredder is equipped with a safety lock feature. Should you want to
disable the shredder (safety lock on), turn the knob a quarter of a turn
anti-clockwise (until the circles are aligned) (fig. D). The safety lock light
will illuminate. To re-activate, align the two circles, push the dial in and
turn clockwise until you reach the unlocked icon. The ready lamp will now
illuminate (fig. E).
Bag Holder
For your convenience, self adhesive hooks to hold the bag in place are
included. To mount simply pull the backing from the hook and press firmly in
the locations illustrated (fig. F).
Bin Full
There is a see through window on the front of the basket. When the chips reach
the middle of this window it is time to jog the bin or empty the basket (no. 5).
Service
Do not attempt to service or repair the unit yourself. If your shredder is under warranty return
it to the point of purchase for replacement or repair. If your shredder is no longer under the
point of purchase return period and requires replacement or repair, please contact your
supplier for further assistance.
5