Technical Information; Installation Considerations - Hansgrohe AXOR Bouroullec Instructions De Montage / Mode D'emploi / Garantie

Table des Matières

Publicité

1⅝"
2¾"
2¾"
Tools Required / Outiles Utiles /
Herramientas Útiles
27 mm
32 mm

7½"
5¾"
7⅛"
2¾"
3 mm
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - spout @ 44 PSI
Flow rate - handshower
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
This trim kit requires rough valve 13444181.
The rough valve and mounting plate must be
installed, and the mounting surface complete and
made watertight before installation of this trim kit.
This unit is not anti-scald. If required by local
plumbing code, install this unit in combination
with an approved remote pressure balance valve
or other approved device.
Protection against backflow is provided by a
check valve and by a self-resetting diverter.
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
10° - 140° F*
176°F*
6.1 GPM
max. .5 GPM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

19446001

Table des Matières