Viewing Images On A Tv Screen; Slide Show - Sony Cyber-shot CSS-TNA Mode D'emploi

Viewing images on a TV
screen
1
Connect the A/V connecting cable
(supplied) to the A/V OUT (MONO) jack
of the Cyber-shot Station and the audio/
video input jacks of the TV.
If your TV provides stereo input jacks,
connect the audio plug (black) of the A/V
connecting cable to the left audio jack.
– Turn off both the camera and the TV
before connecting the Cyber-shot Station
and the TV with the A/V connecting
cable.
2
Set the DISPLAY SELECT switch to "TV".
– Images will not be displayed on the
screen of the camera.
3
Set the mode switch of the camera to
, and turn on the power by pressing
the POWER button on the Cyber-shot
Station or the remote control.
4
Turn on the TV and set the TV/Video
switch to "Video".
5
Press b/B on the Control buttons of the
remote control to select the image.
You can also select the image by pressing
b/B on the Control buttons of the camera.
– When using the Cyber-shot Station with
the DSC-N1, use
control.
– The Cyber-shot Station is compatible with
both NTSC and PAL TV systems. For further
details, see the operating instructions
supplied with the camera.
12-GB
A/V connecting cable
/ on the remote

Slide Show

You can playback a series of still images and
movies recorded with your camera by only
pressing the SLIDE SHOW button on the
remote control or the Cyber-shot Station.
1
Set the mode switch of the camera to
, and turn on the power by pressing
the POWER button on the Cyber-shot
Station or the remote control.
2
Press the SLIDE SHOW button on the
remote control or the Cyber-shot
Station.
To cancel Slide Show
Press the SLIDE SHOW button on the remote
control or the Cyber-shot Station again.
• You can change the settings of Slide Show
([Interval], [Image], and [Repeat] etc.) with
the settings on the camera. For further
details, refer to the operating instructions
supplied with the camera.