Cleaning The Screen Or Interior; Fog-Proof Filter; Preparation For Cleaning - Sony DXF-20W Mode D'emploi

Refitting the Eyepiece
1
Align the match mark on the eyepiece
lock ring with that on the viewfinder
barrel.
2
Align the match mark on the end of the
eyepiece (see Step 2 in "Detaching the
Eyepiece") with that of the eyepiece
lock ring, then insert the eyepiece into
the viewfinder barrel.
3
Turn the eyepiece lock ring clockwise
until its "LOCK" indication arrow
points to the match mark on the
viewfinder barrel.
Cleaning the Screen or
Interior
When cleaning the screen or the interior of
the viewfinder, detach the viewfinder from
the camcorder, then clean it taking care not
to damage the components.
To detach the viewfinder from the camcorder, see
"Attaching the Viewfinder to a Camcorder" on page
17 and conduct the attachment procedure in reverse.

Preparation for Cleaning

Viewfinder
barrel
Eyecup
holder
1
Detach the eyepiece from the
viewfinder barrel.
20 Handling the Eyepiece
Eyepiece
Protecting
Eyecup
filter
Packing ring
For the detaching procedure, see "Detaching
the Eyepiece" on page 19.
2
Remove the eyecup from the eyecup
holder.
3
Remove the protecting filter, together
with the packing ring, from the eyecup
holder.
4
Detach the protecting filter from the
packing ring.
To clean the screen or the mirror
Use a commercially available dust blower.
To clean the lens or the protecting
filter
Use a commercially available lens cleaner.
Note
Do not use organic solvents such as
thinners.

Fog-Proof Filter

Depending on the temperature and
humidity, the protecting filter may mist,
especially if you breathe near it. You can
replace the protecting filter with an optional
fog-proof filter to prevent the fogging.
Attaching the fog-proof filter
Detach the protecting filter from the
packing ring, and replace it with the fog-
proof filter.
To remove the packing from the protecting filter, see
the procedure "Preparation for Cleaning" (page
20).
Note
When cleaning the fog-proof filter, wipe the
filter very gently with a soft cloth to avoid
impairing the anti-fogging effect.