Winter Storage Of The Boundary Cable - AL-KO Robolinho 500 Mode D'emploi

Masquer les pouces Voir aussi pour Robolinho 500:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 90
GB
11.2 Storing the base station
The base station can, but does not have to be put
into storage. Storage prevents premature ageing,
however, such as fading of the colour or corro-
sion of the charging contacts.
If the base station remains outdoors:
1. Disconnect the power supply from the mains
supply and unplug from the base station.
2. Roll up the cables of the base station.
3. Store the power supply.
4. Grease the charging contacts with contact
grease.
When the base station is to be put into
storage:
1. Carry out all work mentioned above.
2. Disconnect the base station from the bound-
ary cable.
3. Remove the base station and remove any
soiling with a broom and a slightly damp
cloth.
4. Store the base station:
at a dry, lockable location protected from
frost
out of the reach of children
If only the charging pole is stored:
1. Disconnect the power supply from the mains
supply and unplug from the base station.
2. Disconnect the base station from the bound-
ary cable.
3. Remove any soiling with a broom and a
slightly damp cloth.
4. Removing the charging pole:
Unscrew both screws of the charging sta-
tion (08/4).
Remove the charging station from the
base station by tilting.
Undo the plug connection of the cables
from the base station and charging sta-
tion.
Close the opening of the base (08/5) with
the included winter cover (08/6).
5. Store the base station:
at a dry, lockable location protected from
frost
out of the reach of children
54

11.3 Winter storage of the boundary cable

The boundary cable can remain in the ground
and does not need to be removed.
1. When the base station has been put into stor-
age: Grease the cable ends with contact
grease and wrap with adhesive tape. This
protects the cable ends against corrosion.
12 DISPOSAL
Information on the German Electrical and
Electronic Equipment Act (ElectroG)
Electrical and electronic appliances do
not belong in household waste, but
should be collected and disposed of
separately.
Used batteries or rechargeable batter-
ies that are not installed permanently in
the old appliance must be removed be-
fore disposal. Their disposal is regulat-
ed by the battery law.
Owners or users of electrical and elec-
tronic appliances are obliged by law to
return them after use.
The end user bears personal responsi-
bility for deleting his personal data from
the old appliance to be disposed of.
The symbol of the crossed-through rubbish bin
means that electrical and electronic appliances
may not be disposed of in the household rubbish.
Electrical and electronic appliances can be hand-
ed in at no charge at the following places:
Public service disposal or collection points
(e.g. municipal building yards)
Points of sale of electrical appliances (sta-
tionary and online) provided traders are
obliged to take them back or offer this volun-
tarily.
These statements only apply to appliances that
are installed and sold in the countries of the Eu-
ropean Union and are subject to European Direc-
tive 2012/19/EU. Different provisions may apply
to the disposal of electrical and electronic appli-
ances in countries outside the European Union.
Disposal
Robolinho 500 E/I

Publicité

Table des Matières
loading

Table des Matières