Ivoclar Vivadent Programat CS3 Mode D'emploi page 8

4. Editing the firing parameters
Parameters are set or edited in two steps.
Example: Setting the holding temperature
A In the program screen, press the [Parameter] button.
Press the [T] button.
B
C Enter the desired holding temperature and confirm
by pressing the green button.
The holding temperature has been changed successfully. All parameters
shown in the firing curve can be changed / edited the same way.
Changing program options
By pressing the [Options] button, the menu for additional program options opens.
Example: Open the write-protection program
In the program screen, press the [Parameter] button.
A
Press the [Options] button.
B
Edit the desired option and return to the program view
C
by pressing the [Close] button.
By pressing the [Arrow] buttons, you can change between the individual
option pages.
Ivoclar Vivadent programs are partially blocked and cannot be edited.
Please refer to the Operating Instructions for more detailed information.
B
B
A
C
A
C