Instructions; Cleaning; Warranty; Maintenance - Metrix MX 650 Notice De Fonctionnement

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4

1.1.4. Instructions

Before opening the instrument, disconnect it from the
measuring circuits and make sure that you are not charged
with static electricity, which could irreparably damage the
instrument's internal elements.
A "qualified person" is someone who is familiar with
the installation, the construction, the application and the
dangers at hand. This person is authorised to power up and
power down the installation and equipment, in compliance
with safety regulations.

1.1.5. Cleaning

Turn off the power supply. Clean with a damp cloth and soap.
Never use abrasive products or solvents.

1.2. Warranty

This equipment is guaranteed against any material or
manufacturing defects, in accordance with the general
conditions of sale.
During the warranty period (1 year), the instrument can only
be repaired by the manufacturer, who reserves the right to
repair the instrument or to exchange all or part of it. If the
equipment is returned to the manufacturer, the outgoing
transport costs are borne by the customer.
The warranty is not applicable in the following cases:
1.
improper use of the equipment or use of it in conjunction
with incompatible equipment;
2.
modifications to the equipment without the explicit
authorisation of the manufacturer's technical department;
3.
work carried out on the instrument by a person not
approved by the manufacturer;
4.
adaptation for a specific application, not included in the
definition of the equipment or the user's manual
5.
knocks, falls or flooding.
The contents of this manual must not be reproduced in any
form without our consent.

1.3. Maintenance

Return your instrument to your distributor for any work to be
done within or outside the guarantee.

1.4. Unpacking - Repacking

All
the
equipment
was
checked
electronically before shipment. Every precaution was taken to
ensure that you receive the instrument undamaged. It is a
good idea to check quickly to detect any damage that may
have occurred during transport. If there is any damage,
immediately
notify
the
transporter
reservations.
Caution! If you ship this instrument on elsewhere, use
preferably the original packaging and indicate the
reasons for reshipment as clearly as possible in a note
enclosed with the equipment.
18
Chapter II
mechanically
and
of
the
customary
MX 650 / MX 655

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mx 655

Table des Matières