Hendi 208953 Mode D'emploi page 28

ASSEMBLY GUIDANCE ON WATER INLET GROUP:
Tool Name: T10 screw tool
1) Take out the Drip Tray and the water tank, ensure no beans inside the bean con-
tainer. Put the coffee machine aside down, cut off the original water hose by the
scissor.
2) Take out the original water hose and put one side onto the water connector tube
of water inlet group.
3) After connecting the water inlet group, put the machine onto the basement and
ensure the silicon pipe is in the notch. Please do not let the machine press the
water pipe.
4) Put the water pipe into the water barrel.
Special Instruction:
1) Using water inlet group, when turn on the machine, the screen shows "Unit
Empty", it's normal, just follow instruction to fill in water into system.
2) The water tank cannot be used if the machine is equipped with the water inlet
EN
group, otherwise the machine will be damaged.
3) The filter inside the water inlet group cannot be taken out to avoid the blog by
impurities in the water.
28