Power On; Power Off - Hendi 208953 Mode D'emploi

POWER ON

• As the machine has been tested at factory, there may be a little coffee powder
left. We promise the machine is brand new.
• The coffee machine will start self-testing and cleaning at the first-time use,
this helps the coffee machine achieve the best working condition, and this
process cannot be skipped.
• Every time powering on the coffee machine, it will automatically complete
heating and cleaning for one time, and the process cannot be stopped.
The coffee machine can only be used after finished the above cycle process.
• During the cleaning process, some hot water may flow out of the coffee
spout into the drip tray. Please avoid contacting the spilling hot water.
Please ensure the power is connected before pressing
power button.

POWER OFF

• Every time when powering off the coffee machine, it will automatically com-
plete cleaning process for one time, and the process cannot be stopped.
This operation is to clean up the coffee pipelines and remove the coffee
grounds.
• During the cleaning process, some hot water will flow out of the coffee
spout into the drip tray. Avoid touching spilt hot water, so as not to be burned.
• Only after using milk/cream/cappuccino/lattee, the Rinse Milk Unit function
will be operated when power off.
When you press
auto cleaning.
power button, the machine will be power off after
EN
11