Energy-Saving Setting; Automatic Switch Off; Reset; Information - Hendi 208953 Mode D'emploi

ENERGY-SAVING SETTING

• In the energy-saving mode, the machine needs 30
seconds to warm up and then to make Cappuccino,
Coffee Latte, Hot milk and Cream. While for nor-
mal mode, making above beverages do not need
waiting heat up. The normal mode is more energy
consumption than the energy-saving mode.
AUTOMATIC SWITCH-OFF
• The machine's default switch off time is 30 minutes,
which means the machine will automatically switch
off after the last use on 30 minutes.
• The setting range of automatic switch-off is from
15 minutes to 24 hours.

RESET

• This function will reset all the menu setting and
default beverage parameters to the factory set-
tings (except the language options). In addition,
the information options will not be reset.

INFORMATION

EN
• In this program you can view the information on num-
bers of produced each drinks, total drinks num-
bers, and maintenance times.
1. Total numbers on produced drinks
2. Numbers of produced espresso
3. Numbers of produced long coffee
4. Numbers of produced hot water
5. Numbers of produced cappuccino
6. Numbers of produced coffee Latte
7. Numbers of produced hot milk

LANGUAGE

• You can set your preferred language on the coffee ma-
chine.
• After entering the program setting, turn the rotary button

EXIT

• After entering the program setting, please turn the rotary
button to the "EXIT" option. Then press the rotary button.
16
• The factory default setting of the machine is normal
mode.
• After entering the program setting, please turn the rotary
button to "ECO SETTING" option, then press the rotary
button, setting is finished.
• After entering the program setting, please turn the rotary
button to the "Auto-off" option. Then press the rotary but-
ton, the setting is completed.
• After entering the program setting, please turn the rotary
button to "RESET" option then press the rotary button to
confirm, the setting is completed.
8. Numbers of produced cream
9. Numbers of rinsing operations
10. Numbers of decalcifying operations
11. Numbers of produced coffee by coffee powder
12. Numbers of rinsing brewing unit operations
13. Numbers of rinsing milk unit
• At the first-time use, there is already a number of
produced beverages because each coffee machine
has been tested before leaving factory.
to the "CHOOSE LANGUAGE" option, then press the ro-
tary button, rotate the rotary to choose the language,
and press the rotary button, setting is completed.
After completing setting, the machine will return to
"READY".