Eschenbach smartlux digital Mode D'emploi page 56

5. Disconnect the smartlux DIGITAL from the PC using the "Unplug and eject
hardware" function, whose icon you can find on your operating system taskbar.
6. Open the settings menu, select the
7. Select the
return to the previous page, select the
The following icon will be displayed on the screen during the firmware update:
The smartlux DIGITAL turns off automatically after a successful update. Do not turn
off the device under any circumstances during the firmware update. Otherwise,
the smartlux DIGITAL could be irreparably damaged. This type of damage is not
covered by the warranty!
You can use the
level and return to the main menu.
icon and press the
icon and confirm it with the
icon and press the
button t. To cancel the update and
icon and press the
button t to quit this menu
- 56 -
button t.
button t.