Eschenbach smartlux digital Mode D'emploi page 54

Enabling/disabling the blue light filter
By default, the blue light filter is disabled. Select this icon and press the
if you want to enable it.
If the blue light filter is enabled ( ), the amount of blue light is reduced. The display
becomes more yellow and the colors appear softer.
Changing the timeout settings
By default, the device turns off automatically after approximately 5 minutes, if it is
not being used. Select this icon and press the
approximately 8 hours.
Restore factory settings
Select this icon and then press the
tings, if necessary. All settings will then be as set at the works.
button t to extend this period to
button t to reset the device to factory set-
- 54 -
button t