Eschenbach smartlux digital Mode D'emploi page 55

Updating the firmware
Select this icon and press the
of the device and to update it, if necessary. If you have registered your smartlux
DIGITAL, you will be notified about any available firmware updates.
To update the firmware please proceed as follows:
1. Connect the smartlux DIGITAL using the provided USB cable.
2. Turn on the smartlux DIGITAL. The screen will display 2 icons:
USB data connection – the internal memory of the smartlux DIGITAL
will then be recognized as a USB stick/removable drive by the computer
and displayed as "ESCHENBACH" drive.
USB connection for charging only.
Select the USB data connection icon and press the
3. Use the connected PC to open the web address that was provided in the email
notifying you about the firmware update.
4. Download the firmware update and save it directly on the drive – not in a drive
subfolder.
button t to display the current firmware version
- 55 -
button t.