Scheduled Maintenance Table - Nilfisk Advance SW5500 Instructions D'utilisation

SCHEDULED MAINTENANCE TABLE

Procedure
Battery charger
Battery (WET) electrolyte level check
Main broom cleaning
Side and main broom height check
Hopper dust filter check and cleaning ("A" method)
Hopper lifting system hydraulic oil level check
Skirt height and operation check
Dust guard system water filter check and cleaning (optional)
Brake cable check/adjustment
Hopper dust filter check and cleaning ("B" method)
Filter shaker operation check
Main broom driving belt check
Steering chain cleaning
Steering chain check/adjustment
Safety device operation check
Brake drums check/adjustment/replacement
Hopper dust filter check and cleaning ("C" method)
Main broom drive belt check and/or replacement
Hopper gasket integrity check
Lifted hopper sensor operation check/adjustment
Motor carbon brush check and/or replacement
Hydraulic system oil change
(*) For the relevant procedure, refer to the Service Manual.
(1) Daily or after using the machine.
(2) Or before start-up.
(3) Or more often in dusty areas.
(4) Or more frequently if the machine is used on slopes.
(5) Change the hydraulic system oil after 500 hours or every year.
09/2016
INSTRUCTIONS FOR USE
Every
Upon delivery 10
hours
(1)
(2)
1467284000 - SW5500
Every Every Every
50 100 200
hours hours hours
(3)
(2)
(*) (4)
(3)
(*)
(*)
(*)
(*)
(2)
(*) (4)
(3)
(*)
(*)
(*)
ENGLISH
Every
year
(*)
(*)(5)
19