Locating A Particular Point In A Track - Sony MDS-JE530 Mode D'emploi

Playing a track by entering the track
number Z
Press the number button(s) to enter the track number
of the track you want to play.
To enter a track number over 10
1
Press >10.
2
Enter the corresponding digits.
To enter 0, press 10/0 instead.
Examples:
• To play track number 30, press >10, then 3 and 10/0.
• To play track number 108, press >10 twice, then 1, 10/0,
and 8.
z
If you enter a track number while the deck is stopped or
paused
The deck will still be stopped or paused at the beginning of the
track.
Locating a Particular Point
in a Track
You can locate a particular point in a track during play or
play pause.
Locating a point while monitoring the
sound
Press down m/M during play.
You will hear intermittent playback as the disc goes
forward or in reverse. When you reach the point, release
the button.
Notes
• If the disc reaches the end while you're pressing M, the deck
stops.
• Tracks that are only a few seconds long may be too short for
monitoring. For such tracks, play the MD at normal speed.
Locating a point by observing the time
indication
Press down m/M during play pause.
The elapsed playing time of the track appears in the
display. When you reach the point, release the button.
No sound is output during this time.
z
When "- Over -" appears in the display
The disc has reached the end while you're pressing M. Turn
AMS counterclockwise (or press .) or press m to go back.
m/M
25
GB