Standby Mode; Settings; Operating Lock; Standard Display - Stiebel Eltron CK 20 Premium Utilisation Et Installation

oPerATIoN

settings

4.3

Standby mode

Material losses
In standby mode, the appliance will not switch on heating
under any circumstances. There will be no frost protec-
tion.
f To switch on the programming unit, press "Standby". The f
standard display appears.
f To put the programming unit and the heating appliance into f
standby mode, press "Standby". The display shows "- - - -".
5. Settings
5.1

Operating lock

To lock or unlock the user interface, press and hold "+" and "–"
simultaneously for 5 seconds.
5.2

Standard display

The standard display is continuously displayed. If no user action
is performed for longer than 20 seconds while in the menu, the
device automatically switches to the standard display.
The default display shows the current set room temperature as
well as the "Editable parameter" symbol. You can use "+" and "–"
to change the set room temperature.
If the set room temperature corresponds to one of the values
set for the comfort or setback temperature, the symbol for the
corresponding operating mode (comfort mode, setback mode)
appears in the menu bar.
The set room temperature can also be changed manually with a
time program activated. The changed set room temperature is
maintained until the next programmed switching point is reached.
5.3

Standard menu

To access the standard menu, briefly press "Menu". You can now
call up the following menu items:
display description
Select day of the week and time
Select comfort temperature
The comfort temperature must be set at least 0.5 °C higher
than the setback temperature.
Select setback temperature
www.stiebel-eltron.com
display description
Switch "Window open detection" function on and off
Select time program (Pro1, Pro2, Pro3, Pro4) or deactivate
(off)
Switch "Adaptive start" function on and off
Set silent mode
Lo = quiet 1000 W base heating stage
Hi = powerful 2000 W rapid heating stage
To change the setting of a menu item, call the relevant menu item
up using "+" and "–". Press "OK".
As soon as the "Editable parameter" symbol appears, you can
change the setting of the menu item with "+" and "–". Press "OK"
to save the setting.
To exit the standard menu, press "Menu". The standard display
appears.
5.3.1 120-minute short-time timer
With the 120-minute short-time timer, you can activate comfort
mode for a selected time of up to 120 minutes. During this selected
time, the appliance heats to the set comfort temperature. After
this, the appliance operates in setback mode.
If you wish to use the 120-minute short-time timer, select time
program Pro4 from the standard menu.
The standard display shows the selected time in minutes as well
as the "Editable parameter" symbol. Using the "+" and "-" buttons,
you can select any length of time from 10 - 120 minutes.
To activate the short-time timer, press "OK". The appliance switch-
es to comfort mode until the end of the selected time. The minute
display flashes during this period.
If you wish to stop the short-time timer, press and hold "OK" for
longer than 3 seconds.
At the end of the selected time, the appliance automatically reverts
to setback mode.
CK 20 Premium | 19