Replacing A Fuse - GGP ITALY MP 84C Manuel D'utilisation

6.3.3 Replacing and repairing the tyres
The tyres are «Tubeless» and so all punctures must be repaired
by a tyre repairer following the procedures required for this kind
of tyre.
6.3.4 Replacing the bulbs (if present)
The bulbs (18W) have a bayonet fitting and are installed in the
bulb holder which can be taken out by turning it anti-clockwise
with pliers.

6.3.5 Replacing a fuse

The machine is fitted with fuses (1) with different capacities and
functions. Specifically:
EN 30
1
– 10 A fuse = protects the main and power circuits of the elec-
tronic board. When it blows, the machine stops.
– 25 A fuse = protects the battery charger circuit. When it blows,
the battery gradually runs out and the machine will have prob-
lems starting.
The fuse capacity is indicated on the fuse.
IMPORTANT
A blown fuse must always be replaced by
one of the same type and ampere rating, and never with one of
another rating.
If problems persist, contact Your Dealer.
1