Recalling Preset Rds Stations - Alpine 3DE-7887R Mode D'emploi

1
2
1
PTY
4
M. I. X.
3
1
PTY
4
M. I. X.
40
AF
AF
AF
2 3
NEWS MONO
5 6
RPT SCAN
PI SEEK
2 3
NEWS MONO
5 6
RPT SCAN
RDS Operation
Recalling Preset RDS
Stations
Press the AF button to activate the RDS mode.
The display shows "AF" when the RDS mode is
activated.
Make sure that the Function indicator is
illuminating, then press the preset location
BBC R3
button in which your desired RDS station is
preset. If the preset station's signal is weak, the
unit automatically searches and tunes to a
stronger station in the AF (Alternative Frequen-
cies) list.
If the preset station and the stations in the AF
list cannot be received:
The unit searches again for a station in the PI
(Programme Identification) list.
If there are still no stations receivable in the
area, the unit displays the frequency of the
preset station and the preset indicator disap-
pears.
If the signal level of the Regional (Local) station
being tuned becomes too weak to receive, press
the same preset location button to tune in a
Regional station in other district.
Note: For presetting the RDS stations, refer to
the Radio Operation section. The RDS
stations can be preset in the F1 and F2
bands only.
English