Before Playing A Disc; Turning The Power Off; Setting The Current Time (12-Hour Display); Operations Possible During Playback - Denon RCD-M38 Manuel De L'utilisateur

Before playing a disc

1 Press .
ON/STANDBY
Press to set the input source to "DISC".
2 SOURCE
If no disc is loaded "NO DISC" is displayed.
Insert a disc (vpage 3).
3
< 5 >
• Press to open/close the disc tray.
< 1 / 3 >
• The disc tray also closes when
NOTE
Do not place any foreign objects in the disc tray. Doing so could
damage it.

Turning the power off

Press .
ON/STANDBY
The power indicator turns off, and so does the power.
NOTE
• Be sure to stop playback before turning the power off.
• Make sure that the disc tray is completely shut before turning off
the power.
• Do not push the disc tray in by hand when the power is turned off.
Doing so could damage the set.
Preparations
Setting the current time
(12-Hour Display)
GExampleH Setting the current time to 10:15 am
1 Press
ON/STANDBY
2 Press
[MENU]
Various types of setting menus are displayed.
[CD 1/3]
or is pressed.
3 Use
[ui]
press
[ENTER/MEMO]
4 Use
[ui]
5 Press
[ENTER/MEMO]
The "minutes" display fl ashes.
6 Use [ui]
7 Press
[ENTER/MEMO]
The current time is set, and the normal display reappears.
n Checking the current time when the power is on
[CLOCK]
Press
Press once more and the display returns to its original condition.
n Checking the current time when the power is
set to standby
Press [CLOCK]
The current time is displayed for 10 seconds.
NOTE
The time cannot be set when in the standby mode. Turn on the power
fi rst.
to turn the power on.
.
to select "CLOCK SETUP", then
or .
[p]
M E N U
C L O C K S E T U P
to set the "hours".
C L O C K S E T U P
A M 1 0 : 0 0
or [ p ].
to set the "minutes".
C L O C K S E T U P
A M 1 0 : 1 5
or .
[p]
.
.
Operations possible during
playback

Adjusting the master volume

Either turn or press
<VOLUME> [VOLUME
The volume level is displayed.
[Adjustable range]
VOLUME 00 – 45, VOLUME MAX

Input source switching

Press to select the input source.
SOURCE
DISC TUNER
(AUX1/Dock)
z2
USB PORTABLE IN
z1 "AUX1/Dock" is displayed when a control dock for iPod is
connected to "AUX1".
z2 "PORTABLE IN" is only displayed when connected.
ENGLISH
.
df ]
z1
AUX1
AUX2
11