Tuner Playback; Tuning In Broadcast Stations; Automatically Presetting Fm Stations (Auto Preset) - Denon RCD-M38 Manuel De L'utilisateur

ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control
<8/-, +/9>
SOURCE
[NUMBER]
SOURCE
[TUNER]
[2]
[MENU]
[TIME/DISPLAY]
14

Tuner playback

Tuning in Broadcast Stations

BUTTON
<BUTTON>
Connect the antenna beforehand (vpage 9).
[BUTTON]
1 Press
[TUNER]
band.
<BAND/2>
GAbout the displayH
When "FM AUTO" is selected ........"AUTO" is displayed.
When "FM MONO" is selected ......"MONO" is displayed.
When "AM" is selected .................. The reception mode is not
Use
2 [TU –, TU +]
When a station is received, the "TUNED" indication will light.
• If the function is set to something other than "TUNER", press
[TUNER]
to switch the function to "TUNER".
• The function can also be switched to "TUNER" using
n To tune automatically
Press and hold in
• Stations whose signal is weak cannot be tuned in.
n To stop auto tuning
[TU –, TU +]
[CLEAR/DEL] Press
A humming sound may be heard when using a TV nearby while
[TU –, TU +]
receiving AM programs. If this happens, move the system as far from
[CH –, CH +]
the TV as possible.
[ENTER/MEMO]
[uio p]
or to select the reception
<BAND/2>
FM AUTO FM MONO
AM
displayed.
to select the reception band.
SOURCE
.
[TU –, TU +]
to tune in stations automatically.
.
Automatically presetting FM stations
(Auto preset)
This unit can be preset with a total of 99 FM and AM broadcast stations.
NOTE
Auto preset is not possible with AM broadcast stations.
n Auto presetting with the remote control
Perform this operation when tuned to an FM or AM broadcast
station.
1 Press .
[MENU]
2 Use to select "TUNER SETUP", then press
[ui]
or .
[ENTER/MEMO] [p]
3 Use to select "FM AUTO PRESET", then
[ui]
press or .
[ENTER/MEMO] [p]
Press while "PRESET ENTER" is
4 [ENTER/MEMO]
fl ashing.
Broadcast stations are preset automatically.
Canceling auto presetting
[TUNER] <BAND/2> [2]
Press , or .
Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
NOTE
When FM auto preset is performed, the channel currently registered
as the FM preset is deleted, and the newly preset FM broadcast
station is registered to the same number as the deleted channel.